Loading...
Equipment
BMF microArch S240 10 micron projection SLA 3D Printer
Purpose of equipment
The 3D printer is suitable for the production of smaller microstructured products from photopolymer with dimensional tolerances between ±10 µm. The maximum working volume is 100x100x75 mm. The minimum layer thickness is 5 µm. Production of larger products typically takes a few days.
Access of equipment
Responsible for equipment:
PhD Joško Valentinčič
The equipment is available in the old FS building, basement floor, room 18A. To use the equipment, contact the administrator (Izidor Sabotin) on the phone number 01 477 1 774 between 8:00 a.m. and 4:00 p.m. every weekday.
The equipment is available in the old FS building, basement floor, room 18A. To use the equipment, contact the administrator (Izidor Sabotin) on the phone number 01 477 1 774 between 8:00 a.m. and 4:00 p.m. every weekday.
ARIS research and infrastructure programmes (2) Legend
| no. | Code | Title | Period | Head | No. of publicationsNo. of publications |
|---|---|---|---|---|---|
| 1. | P2-0248 | 1/1/2022 - 12/31/2027 | 3,602 | ||
| 2. | P2-0270 | 1/1/2022 - 12/31/2027 | 8,447 |
Organisations (1)
| no. | Code | Research organisation | City | Registration number | No. of publicationsNo. of publications |
|---|---|---|---|---|---|
| 1. | 0782 | Ljubljana | 1627031000 | 31,213 |