International projects
Transforming Waste Into High-Performance 3D Printable Cementitious Composite
3D concrete printing, durability, construction materials, concrete, waste use, oil shale ash, Life Cycle Assessment
Organisations (1)
, Researchers (7)
1502 Slovenian National Building and Civil Engineering Institute
| no. |
Code |
Name and surname |
Research area |
Role |
Period |
No. of publicationsNo. of publications |
| 1. |
16432 |
PhD Lucija Hanžič |
Civil engineering |
Researcher |
2023 - 2026 |
155 |
| 2. |
58308 |
Anja Kodrič |
Civil engineering |
Researcher |
2023 - 2026 |
11 |
| 3. |
33198 |
PhD Lidija Korat Bensa |
Civil engineering |
Head |
2023 - 2026 |
188 |
| 4. |
13200 |
PhD Aljoša Šajna |
Civil engineering |
Researcher |
2023 - 2026 |
218 |
| 5. |
35413 |
PhD Mateja Štefančič |
Civil engineering |
Researcher |
2023 - 2026 |
44 |
| 6. |
52916 |
Katarina Šter |
Geology |
Researcher |
2023 - 2026 |
74 |
| 7. |
27508 |
PhD Janez Turk |
Civil engineering |
Researcher |
2023 - 2026 |
236 |
Abstract
The objective of the project is to develop a high-performance cementitious composite which repurposes a large proportion of oil shale ash and is suitable for extrusion-based additive manufacturing (3D printing) of full-scale structural elements and buildings.
To develop a high-performance cementitious composite that incorporates industrial waste, especially oil shale ash, and is suitable for extrusion-based additive manufacturing (3D-printing) of objects. In order to achieve these goals, two technologies will be innovatively implemented, namely (i) collision grinding to optimize the granular composition of oil shale ash particles, and (ii) high-frequency ultrasonic dispersion to promote the solidification of the composite and consequently improve the properties that ensure the stability of the fresh product during printing. Demonstration of the product's properties will take place in two stages, (i) during the testing of a small-scale prototype (evaluation of the printability of the mixture on several printers, establishment of a methodology for the assessment of printability) and (ii) by the construction of a large-scale prototype, which will be exposed to outdoor conditions. LCA and LCCA analysis of the pre-mixed dry product will also be performed.
Significance for science
Materials used for 3D printing normally contain large quantities of cement and other high-value powders, either inert or reactive, to ensure cohesiveness and, thus, printability. One of the materials that have the potential to reduce the carbon footprint of printed structures is oil shale ash. In the Baltic states, oil shale is an important natural resource utilised in power plants. Consequently, large amounts of oil shale ash are already available and according to the preliminary research, this material is a viable substitute for cement and high-value powders in printable concrete. However, cement-based mixes for 3D printing are fine-tuned compositions of active and inert particles, water and chemical admixtures and as such, they are sensitive to small changes in composition.
Development of printable mixes thus requires advanced characterisation methods not available in concrete plants. Therefore, one approach to making 3D printing of cementitious composites a practicable construction technology is formulating specially designed blends of all ingredients (except water).